Parts & Accessories

- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly

Replacement parts for JoeBlow Pro and JoeBlow Booster.

Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.

A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.

Upgrades any pump to a SmartHead pump head. Includes hardware, 40-inch hose, and SmartHead pump head.

Upgrade any pump to the TwinHead pump head.

Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.

This sleek, lightweight and compact digital tire pressure gauge works seamlessly with Presta and Schrader valves without changing internal head parts. The digital gauge provides accurate pressure readings up to 260psi / 18bar. The illuminated 360º rotating gauge is easy to read from any angle in daylight or darkness. Compatible with bike / motorcycle / car tires, forks and shocks and the Air Pressure Adjusting Mode continuously reads pressure when using the air release button to fine tune tire pressure. - A digital air pressure gauge that accommodates both Presta and Schrader valves for tires shocks and forks with an easy valve type adjust lever - Features include: auto on 360 degree rotating head lit display and is capable of reading pressure while re

Easy-to-read digital gauge can be attached to a pump or used alone and provides accurate pressure readings up to 300psi / 20.7bar. Rotating head works with Presta, Schrader or Dunlop valves on bike / motorcycle / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. The air release button allows fine tuning pressure. Specs - PUMP HEAD COMPATIBILITY: Presta / Schrader pumps - TIRE VALVE COMPATIBILITY: Presta / Schrader / Dunlop valves - GAUGE: Digital, 300 psi / 20.7 bar - UNIT: psi, bar, kg / cm2 - BATTERY: CR2032 x 1 (included) - THUMB LOCK: Aluminum - PRESSURE TUNING: Air release button - BODY: Aluminum / Engineering grade polymer - SIZE: 9.2 x 5.8 x 4.3 cm / 3.6” x 2.3” x 1.7” - WEIGHT: 102 g / 3.60 oz Added Features: - Rotatable head / gauge - Auto-off function

- Ball-inflating needle for footballs, basketballs and more

- Genuine Sunlite replacement hose - Type: Fits Sunlite Frame Pump : 5.25mm

Replaces worn end on any pump hose. - Head Type: Schrader

• Secures frame pump to frame • Nylon • Also good for use as a watch band

- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm"

- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm

• Presta and Schrader valve compatible head • Hose and head kit fits most floor pumps

Adapts Presta valve stems for use with standard Schrader pumps.

Replacement UHP head O-ring seal

Rebuild kit for the HP floor pump. - Compatible with Air Tool HP floor pump. - Includes O-ring, lube, and grommet.

The Iconic SILCA 24.1 gasket is the heart of the press-on Presta chuck. The current 242 gasket utilizes a high tech and very red, fully synthetic elastomer base material.

The factory replacement for SILCA Press on Disc Chucks. The 252 replace the classic SILCA 25.1 gasket after more than 20 years in the market. This unique gasket borrows from industries which require air-tight seals in the harshest of environments. The 252 gasket utilizes a high tech, full synthetic elastomer base material. It tests to a life expectancy of more than 5X the carbon filled rubber or Buna-N materials used previously. In tests with a major disc wheel manufacturer, the current SILCA Disc Wheel Adapter with 252 gasket excelled by posting a blow-off pressure of 393psi where other designs were unable to reach 120psi. Older versions of the SILCA Disc Wheel Adapter will still benefit for the new gasket, but have a lower hands-free max pressure.

Years ago while Josh was working with the Team CSC at the Dauphine Libere, he noticed one of their mechanics using the most amazing little chuck to manage the disc wheel inflation. Unlike anything he had seen before, it was all metal and used a 'lollipop' lever on the side to lock onto the valve stems in disc wheels. The mechanic explained that these were made in Japan and were coveted by all the Euro-Pro mechanics due to their scarcity. So Josh set out to improve the design and make it available to cyclists everywhere. - Full metal construction, guaranteed for 25 years and covered by SILCAShield - Can effectively seal on valve stems as short as 10mm! - Uses SILCA 254 High-Tech Elastomer gasket - Adjustable gasket pre-load allows for a custom fit on any valve as well as compensation for gasket wear - Male Schrader thread fits into any Schrader chuck, or use SILCA Thread-On Schrader Adapter to fit a bare hose - Bullet-proof high-pressure, disc-compatible chuck for high-pressure situations.

With the TIRE BOOSTER, tubeless tire assembly can be accomplished easily. Even without a compressor. With a power of up to eleven bar every tire immediately seats itself safely on the rim and K275:L277seals everything evenly. If you need an even bigger flow of air, a special adapter is also available. The 435 g light, handy cylinder is the perfect remedy for every tubeless tire assembly, whether at home or on your trips. Only for SV valves. - With the pressure of up to eleven bar every tire immediately seats itself safely on the rim and seals evenly - Great for use when setting up tubeless tires - Refill using a floor pump - Compatible only with Presta valves

Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves

The classic SKS Multi Valve head has been completely revamped! Now you can seamlessly lock the pump head with one finger. The new MV EASY head features improved functionality, a sleek design, and better handling. The head is made of high glass fiber-reinforced plastic. This head features separate holes for use on either Presta or Schrader valve types. Say goodbye to unwanted whistling and stuck check valves, thanks to the new Rocker technology that SKS Germany has put in the new MV EASY pump head. - Max Pressure: 230 PSI - Will work with all SKS floor pumps

The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.

Have an old pump lying around that doesn't work with the standard Presta valves? This is your solution! Built to convert your old schrader pump into a Presta pump!

Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads

Prestacycle redesigned the Head and Washer fit onto bike wheels easier with more room. Prestacycle's new Quick-Click2 design engages the Presta valve just below the cap threads. The head is very easy to get on and off, and gives a nice “click” feeling when it’s installed in the right position. Safe for all types of Presta valves, including tubeless and tubeless-conversion valves. Will not harm newer lightweight performance valves. Fits Quick-Click2 Prestaflator Push/pull Presta heads. Does NOT fit other brands of Disc Wheel heads.

Prestacycle's newest version of the Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.