Filter By:
- Lubes/Cleaners (22)
- Tools (67)
- Workstands (1)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools/Maintenance

$11.50 - $15.99
$12.00 - $15.99
Up to 4% Off
- Evaporates fast and leaves no residue
- A "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high-performance lubricants
- No water rinsing is required
- Clean Streak's No-Rinse, No-Residue formula is perfect for use on disc brake rotors

$14.99
White Lightning's Clean Streak cleans the grimiest, greasiest drivetrains with an easy to use, no mess spray. Clean Streak breaks down grease and road grime and dries in minutes with no residue. Use Clean Streak to prepare your drivetrain for the ultimate fresh coat of chain lube.

$9.50
This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually

$34.95
Topeak's Hexus X is an award-winning, 21-function multi-tool with updated design to store T15, T25, and 8mm hex tool bits inside. Tire levers are securely side-mounted, and have additional tools built into them. The Hexus X is an excellent choice for both road and mountain bike riders.
- Allen wrenches: 2 / 2.5 / 3 / 4 (2 pcs) / 5 / 6 / 8mm
- Torx bits: T15 / T25 / T30
- #2 Phillips screwdriver
- 14G / 15G spoke wrenches
- 2 engineering grade plastic tire levers
- Presta Valve Core Tool
- Chromoly steel chain tool
- Steel wire chain hook
- Weight: 170g
*Chain tool is compatible with single and multi-speed chains up to 12-speed except Campagnolo 11-speed hollow-pin chains

$17.99
The basics of what you need to perform maintenance on TRP and Tektro hydraulic disc brakes.
Includes the following:
- 1 Syringe
- 1 Plastic tubing for syringe/caliper
- 1 Plastic tubing for lever/overflow
- 1 M5 Silver bleed fitting
- 2 M6 Silver bleed fittings
- 1 M7 Black bleed fitting

$25.00
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally.
- Repairs large punctures and slices
- Reacts with Stan's sealant to form an instant, airtight seal
- Barbed plastic tip anchors into tire and will not pull out when riding
- Flexible material and laser-cut shape conforms to puncture and bonds with sealant
- Wears off clean, no trimming needed, and can not be felt while riding, even on road tires
- Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover
- Includes two pre-loaded DARTs for sealing multiple and larger punctures
- Clear caps keep DARTs clean and unthread quickly for fast deployment
- Simple and easy to refill

$40.00
Replacement SWAT MTB Tool.
- Made with hardened CRV steel bits with anti-rust coating and forged alloy frame.
- Includes slotted screwdriver, 3, 4, 5, 6, and 8mm Allen keys, and T25 Torx.
- Please note that this does not include a storage cradle to attach to a frame or cage.

$20.00
One of the only bits of maintenance an internally geared hub needs is occasional oiling. Using the proper oil is essential, and, if you have a Shimano Alfine hub, you've found the right stuff.
- Mineral oil based lubricant specifically for the Alfine 11-speed hub

$43.00
Handy and affordable, this tool makes it easy to get a clean cut every time.
- Securely holds hose while cutting
- Replaceable blade

$24.00
Handy and affordable, this tool makes it easy to get a clean cut every time.
- Securely holds hose while cutting
- Replaceable blade
- Plastic body

$33.00
Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

$19.00
Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

$9.00 - $25.00
$9.00 - $25.00
Up to 40% Off
• Service kits include air can seals and wiper
• Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

$40.00
Periodic hydraulic damper bleeds are necessary to maintain consistent performance. RockShox's Charger Damper Bleed Kit has everything you need to keep your Charger-equipped fork charging hard.

$17.00 - $45.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

$7.50 - $25.00
Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.

$20.00
200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Recon RL/TK A1 (2018+)

$5.00 - $37.00
RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

$12.00
Vivid Air Rear Shock Basic Service Kit
- Includes replacement seal, bushing, o-ring, and bottom-out/negative-bumper

$14.99
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head.
• Presta valve
• 90 degree inflator works with most pump heads

$5.00
The Problem Solvers Suspension Pump Adapter is for use with model-year 1999 to 2000 RockShox SID suspension forks. This aluminum adapter threads into the fork to add air and fine-tune the pressure.

$12.95
Uses:
- Bearing Grease
- "Wax" (application style) Lube
- Bike Wash
- Degreaser
- Rust Remover
- Rust Preventer
- Anti-Seize
- Paint Protectant
- Metal Polish
- Leather Conditioner
Performance:
- Substantially reduces friction improving pedaling, shifting and drive train performance
- Sheds water
- Clean, Lube and Protect with one product
- Improved lubrication and wear resistance even when run dry
- Temperature performance range from -48F to +600F
- Seasons chains and cables after 3-4 applications
- State of the art penetrating characteristics
- Road, Track, Gravel, CX, MTB, BMX & eBike
- Motorcycles
- Skateboards
Technical:
- State of the art Sub-Micron formulation enables the product to be run wet or dry for all riding conditions
- Not vegetable oil or vegetable ester based. Will not dry out or gum up
- No thermal decomposition even in extreme riding conditions
- No Petroleum
- No Alcohol
Environmental:
- Green Engineered
- Bio-based Product
- Non-Toxic
- Biodegradable
- USDA Certified
- Made in the USA with USA raw ingredients
Meets or Exceeds:
- MIL-PRF-6340E ASTM D93 Flash Point
- MIL-PRF-6340E ASTM D445 Kinematic Viscosity 104 F
- MIL-PRF-6340E ASTM D4172 Wear Preventative Characteristics
- MIL-PRF-6340E ASTM D5620 Load Carrying Capacity Jaw Load
- MIL-PRF-6340E ASTM Corrosion Production
- ASTM D 5183, Determination of the Coefficient of Friction for Lubricants: No Fail

$14.00
- Holds socket tool to BB axle to eliminate slippage during removal and installation. New spring preload allows increased flexibility and rotation during use.
- New design works with square taper and splined axles with M8, M12, or M15 internal spindle thread.
- Made from heat-treated tool steel for the ultimate in strength and lasting performance.
- Use with Pedro's Splined Bottom Bracket Socket. Compatible with Pedro's Pro Socket Handle.
If you have ever battled with an over-tightened Shimano and ISIS Drive splined bottom bracket cup, you know why Pedro's created the BB Socket Holder. Though these types of bottom brackets proved themselves as the standard for many years and continue to be found on many bikes, the tendency for their shallow splines to slip during removal or installation has resulted in more than a few expletives, high frustration levels, and worst of all, injuries. The Pedro's BB Socket Holder II provides a simple, shop-quality tool that solves this problem. The new design works on bottom brackets spindles with M8, M12, or M15 threads and adds spring preload for increased flexibility and rotation during use. Backed by Pedro's lifetime warranty.

$18.99
Checking your chain for wear is one of the simplest things any cyclist can do to maintain drivetrain performance and minimize maintenance costs. The Pedro's Chain Checker Plus II makes this task quick and easy offering a simple check of 50% and 75% chain wear. To ensure the maximum life from your chain and accuracy of measurement, the tool employs a three-point design which properly isolates pin wear from roller wear. Other two-point designs do not and can incorrectly indicate a worn chain, robbing the user of additional miles and money. The Chain Checker Plus II also includes a chain hook tool, perfect for simplifying chain removal and installation, and a chainring nut wrench, essential for removal and installation of chainrings.
- Three point chain wear tool design properly isolates pin wear from roller wear
- Includes a chain hook tool for simplifying chain removal and installation, and a chainring nut wrench for removal and installation of chainrings
- Two chain wear indicators: 50% and 75%
- Improved user instructions are laser etched on the tool

$17.49
If you are looking for the absolutely strongest, most bad-ass tire lever, perfect for the toughest downhill and freeride tires, you've come to the right place. Pedro's downhill tire lever features heat-treated tool steel construction for unmatched strength and reliability, 275mm (10.8") length for incredible leverage, a large shovel tip that holds tight on the bead, a smooth curved shape with polished finished to protect tires and rims, and an ergonomic dual density screw driver style handle providing comfort and security.
- Heat-treated tool steel construction for unmatched strength
- 275mm length for incredible leverage on tough downhill and freeride tires
- Large shovel tip holds tight on bead while smooth finish protects tire and rim
- Ergonomic handle provides comfort and security
Page 1 of 3
Next page